Βαλβίδες ρύθμισης ροής υλικού

The Airblast Micro Valve guarantees unmatched performance, dependability and durability.

Use the AMV to replace Flat Sand Valves (FSV) and all other type of less economic valves. This makes your blast system a more profitable piece of equipment with a considerable reduced consumption of abrasive.

The Airblast Micro Valve offers one of the highest degree of abrasive metering adjustment. This permits precise, constant abrasive flow to the blast nozzle, resulting in significant cost savings due to virtually no abrasive wastage.

Suitable for use with all types of abrasives such as Garnet, fine mesh aluminum oxide, as well as steel shot and grit the AMV is uses considerably less abrasives when compared with the FSV valves, combined with maximum blasting productivity and reduced downtime.

The Airblast Flat Sand Valve is used to provide precise metering of abrasive from the blast pot to the blast hose.

With its unique 45° design, the FSV Flat Sand Valve permits a smooth, natural flow of abrasives into the blasting air stream, and overcomes some of the premature wear which may occur in some other types of abrasive control valves.

One fixed, and one movable stainless steel metering plate provide long life and a high degree of metering adjustment, ensuring maximum productivity without abrasive wastage.

The FSV Flat Sand Valve is best suited to blasting applications using expendable type abrasives, such as crushed glass and copper slag.

The original Thompson Valve is a normally closed, self sealing, abrasive metering valve known for its instant, smooth response to either pneumatic or electric deadman controls. This fail-safe valve shuts off abrasive flow to the nozzle and seals the tank at the same instant. A remote abrasive cutoff is available, allowing the operator to stop the flow of media while continuing a constant flow of air. This provides a quick and easy way to clear the blast

hose and blasting area of abrasive.

Designed for superior operator safety, the Thompson Valve is ideal for multiple outlet use and is easily adaptable to most existing blasting systems. It is engineered to allow precise metering of all types of abrasive media and can be modified for special applications.

The Airblast AP-7 Abrasive control Valve 1/2” is used to provide precise metering of abrasive from the blast pot tothe blast hose.

One fixed, and one movable stainless steel metering plate provide long life and a high degree of metering adjustment, ensuring maximum productivity without abrasive wastage.

The AP-7 Abrasive control Valve is best suited to blasting applications using expendable type abrasives, such as crushed glass and copper slag.